(8)Diffuser works great to reduce the harsh speedlight flash and shoot in portrait without annoying shadows. Includes white, amber and silver inverted dome covers. Universal fit for most speedlight flashes, velcro strap holds diffuser in place. Read more
(25)The Omni-Bounce Flash Diffuser creates a diffused bare bulb effect, and is designed specifically to fit the Canon 270EX Flash Unit. It gives even coverage across the entire frame, and works flawlessly with lenses from 15mm to 200mm in the 35mm format (as well as other formats).
The Omni-Bounce is easy to use and attaches to your flash in seconds with a snug, custom fit, and not a single piece of velcro or other adhesive. Designed for years of service with out the bulk of some other diffusers, it is small enough to fit easily into your gadget bag or pocket, yet it makes a huge difference in all your photos.
Read more
(30)Transmitter Power Source: 23A/12V * Receiver Power Source: AAA Alkaline battery (not included) * Operation Distance: About 30ft * Sync Speed: 1/500sec * Frequency?433MHZ * Size: 55 x 61 x 43mm / 2.2 x 2.4 x 1.7in (L x W x H) Package Includes: * 1 x Transmitter * 2 x Receiver * 1 x User Manual * 1 x PC Sync Cord Compatible with following flash units: Canon: 580EX II, 580EX, 550EX, 540EZ, 520EZ, 430EX, 430EX II, 430EZ, 420EX, 420EZ, 380EX... Nikon: SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24 Pentax: AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT Olympus: FL-50, FL-40, FL-36 Vivitar: 285HV (Older Vivitar 285/283 works only with PC sync) Other: Flash models with a trigger voltage of 12V or lower Read more
this adapter fits on the hot shoe of most cameras. It terminates in a 1/4-20 threaded. It was initially designed for the 200B Flash, but will fit any accessory of your choice with a 1/4-20 thread. Read more
(1)
This 4 channel Wireless Radio Slave Flash Trigger is a great way to add versatility to outdoor or indoor photography shooting. 4 channel DIP selection allows the capability to work in a multi-studio environment. Each kit can be used to wirelessly trigger flash lights or strobes. Each receiver is plugged into a single flash or strobe and needs 2 AAA batteries for operation (not included in kit).
The transmitter can be mounted either on a camera's hotshoe or connected to the camera's PC socket with the cord supplied. Using the PC socket connection (if your camera has one) allows simultaneous use of a hotshoe-mounted flash unit and off-camera flashes with this radio trigger set. There is a test button on the top of the transmitter for test firing.
Kit Includes:
Transmitter
2 Receivers with Phone Plug connector
Mini-Phone plug adapter for receiver
Accessory PC to Mini-Phone Plug sync cord
Read more
(27)This spring clamp attaches to bars up to Ø 40mm. Supplied with a position able miniature ball head with a flash shoe it is able to clip and position a flash unit wherever it is needed. Load capacity : 4.41 lbs.; panoramic rotation : 360 °; clamp range - min (round tube) : 0.2 in.; clamp range - max. (round tube) : 1.57 in.; color : black; built-in head; material : aluminum + steel; -90° / +90° tilt range; attachment (bottom) : type 17; attachment 2 : type 1; length : 6.14 in.; weight : 0.73lbs. Read more
(11)Specifications:
Guide Number:33 ( ISO 100 )
Flash Mode: M, S1, S2
Vertical Rotation Angle :0~90 degrees
Horizontal Rotation Angle: 0~270 degrees
Lighting Times: 100-1500 times ( AA alkaline batteries used )
Recycle Time :approx 0.5-5s ( AA alkaline batteries used )
Light Quantity Output Control :with 1/8 - stop increment
Color Temperature: 5600K+200K
Flash Duration :1/800s~1/2000s
Dimensions :190*75*55mm
Net Weight :286g
Features: ?
1. M Mode
Press the MODE key to M Mode. In this mode, you can set TT520 On to your camera hot shoe or speedlite trigger hot shoe to trigger the flash unit. When shooting, adjust the flash power and press the camera shutter, the flash light will flash under the camera synchronous signal.?
2. S1 Mode
(1) Press the MODE key to S1 Mode. The Mode is applicable for slave flash in order to create many lighting effects. It is respectively applicable for manual flash environment.?
(2) When the flash is S1 mode, it will fire synchronously when the master flash fires, comparable with the effect by the use of radio trigger. ?
3. S2 Mode
Press the MODE key to S2 Mode. The mode is applicable for slave flash in order to create many lighting effects. It is respectively applicable for TTL flash environment. The flash unit won't flash synchronously with the first flash but the second flash from the master flash.?
4. Power-saving Function
(1) To save battery power, the flash will enter stand-by state in about 30 minutes of idle use. Press any button to wake it up.
(2) In S1/S2 mode, the flash will enter stand-by state in about 60 minutes of idle use. Press any button to wake it up.?
(3) In Power-saving mode, the charging indicator flickers in every 3 seconds. Other Indicators are turned off.
5. Protection Function
(1) Protection in continuous flashes
(2) Systematic over-temperature protection Read more
(6)Quick Release Adapter with Short Sliding Plate Read more
Compatible with Cameras: Nikon D3X, D3, D2Xs, D2X, D2Hs, D2H, D1X, D1H, D1, D700, D300s, D300, D200, D100, D90, D80, D70s, D70, D5000, D3000, D60, D40x, D40. Speedlites: Nikon SB-900, SB-800, SB-600, SB-140, SB-50DX, SB-30, SB-28, SB-27, SB-23, SB-22, SB-22s, SB-21B, SB-20, SB-15, SB-14, SB-11. This FC-682 is a quite useful accessory used to achieve off-camera flash photography without the harsh shadows behind the subjects or to achieve special lighting for the subject. This item is an upgraded version of Yongnuo SC-28 TTL cord. It has a hot shoe at each end, so you can use it for two flashes at the same time. Fully works on TTL mode when using only 1 flash. (TTL function could not work well if 2 flashes are used at the same time). There is a built-in tripod socket at the opposite side where the Speedlite unit is mounted. Max stretched length: 3m or 10ft Read more
(45)Designed by the Quirky community and Apple enthusiasts in just 24 hours, the Quirky PowerCurl is a clip-on cord wrap for Apple's 45W, 60W, 85W, and older rectangular 85W MagSafe Power Adapter. The Curl, as we like to call it, makes it easy to unplug and pack up quickly without having to untangle your extension cords the next time you set up shop. MAGSAFE POWER ADAPTER NOT INCLUDED
The PowerCurl is a clip-on cord wrap for Apple's 45W, 60W, 85W, and older rectangular 85W MagSafe Power Adapter. PowerCurl makes it easy to unplug and pack up quickly without having to untangle your extension cords the next time you set up shop.
Both ends of the cord (the plug end and the MagSafe end) can wrap around the device, allowing for quick and easy unraveling. The included clip enables the plug end of your cord to clip to itself, just like your MagSafe end does. Fear over-heated adapters no more -- PowerCurl elevates the power adapter for improved air circulation and cooling.
Keeps your MagSafe cord wrapped up to eliminate cord tangles. Keeps your power adapter elevated to prevent overheating.
Available in blue, gray, orange, green and pink.
Jeff Scholen is an engineer at a medical device company in Atlanta, Georgia, and a new father. He submitted this idea to a Quick & Quirky 24-hour product development throwdown in September 2009. It was one of two products selected and developed during that event, and it passed its presale threshold in just two days. Orange PowerCurls started shipping in November 2009, and additional colors were made available in March 2010.
PowerCurl was brought to life on quirky.com by Jeff and 262 other influencers. Quirky makes invention accessible by bringing creative people from around the world into the product development process, from ideation, design, and branding, right on through to marketing and sales.
Read more
